Log in to add to wishlist
Transparent base coat for preparing hard plastics before coating with acrylic paint, synthetic resin lacquer or nitrocellulose lacquer; it guarantees excellent adhesion and produces a perfect sheen. The standard sprayhead has a spray width of approx. 5-6 cm; replacement sprayheads are available in the widths: fine (approx. 1 cm), medium (approx. 4-5 cm), wide (approx. 8-10 cm) and variable (approx. 13-14 cm). The spray can should be used at room temperature (15-25C). If possible, spray outdoors or in a well-ventilated room. When spraying indoors, ensure the surrounding surfaces are adequately shielded. Mask any areas that are not going to be painted. The object to be painted must be clean, dry and free from traces of grease or rust. Level out any significant unevenness with a scraper or by sanding. It is essential to remove the safety lock before you start spraying (a screwdriver is required for this). Shake the can vigorously for approx. 3 minutes, so the mixing balls can be heard clearly. Shake up the paint again even after short pauses in painting. Holding the can upright, spray with a criss-cross motion at a distance of 25 cm from the object. Press the sprayhead down firmly as you move the can. High-quality branded product. Made in Germany.
Free delivery on orders over £40.00 ex-vat, excluding highlands & islands
Standard delivery charge of £5.99
Express delivery charge of £7.99
Dispatched today if ordered by 5pm.
Got any questions? contact us.
Check our full terms and conditions.
Returns Information
We are happy to refund standard items purchased from Office Stationery within 14 days or purchase.
We have no restocking fees for standard items.
Returned items must be in original packing and as new.
For full terms read our terms and conditions in detail.
This product has 0 Reviews






