Enclosure Systems 15-1904

Product Description

1. Designed for use in industrial applications the 455 Series are wall-mounting 19 inch steel rack cabinets offering sealing to IP55 for deployment in open areas subjected to falling dirt and wind-blown dust particles rain snow or splashing water. Available in four heights and two depths they are supplied with a fitted steel door. Cooling vents are incorporated; fan modules are available to implement forced ventilation.
   
   Cabinets with a lesser degree (IP 54) of sealing are also available see Enclosure Systems Racks - 454 Series - Wall Cabinets - IP54.
   
   The main cabinet is a welded folded steel construction using 1.5mm sheet. The rear panel is sealed other than the fixing points for the four mounting brackets included.
   
   Folded plated steel 19-inch rack-mounting profiles are fitted at the front. These have two sets of perforations to take cage nuts to fix equipment across the front of the rack and accessories such as shelves and chassis guides inside the rack. They have three apertures for cage nuts per 1U on the front face two per U on the inside face and are printed both from the top down and from the bottom up with and#039;Uand#039; height measurements to aid installation. They are screwed to metal flanges welded to the walls of the rack. Provision is made to adjust the position further into the rack to accommodate controls on front panels. Note that rear rack-mounting profiles are not supplied as standard but are available as optional accessories.
   
   On both sides there are square apertures for ventilation. These are covered with fan filters; user-supplied 120mm fans my be fitted. Plastic covers protect the filters. A cover with louvered vents along the front face may be raised on the roof giving access to the vent for outgoing air. This has fan-filters as delivered; optional fan modules may be fitted.
   
   The door opening has a gasket all round the periphery. A swing-handle with cylinder lock operates the three-point locking to ensure a good seal and provide security. This has a door handle which sinks into the door when locked nearly flush with the front. The hinged front door is electrically bonded to the body of the cabinet.
   
   On the base there is an aperture for cable access. Two cover plates are supplied; one is plain the other fitted with one PG48 and two PG21 plastic cable glands as well as two 28mm diameter blind PVC caps.
   
   Cabinets are 600mm wide overall and either 450mm or 600mm deep overall depending on model.

1. Brand: Enclosure Systems
2. rrp: £606.02  
3. Pack Size: 1  
4. Parcel Dimensions: n/a  
5. Enclosure Systems Reference: 15-1904  
6. EAN/UPC Number: