Atlona Technologies ATLUHDEX100CERX ATLHDVS200TXWP Bundle

Product Description

1. Included In This BundleATLUHDEX100CERX - UHD HDMI Receiver 100mThe Atlona AT-UHD-EX-100CE-RX is a 4K/UHD HDMI over 100M HDBaseTandtrade; receiver for AV signals up to 328 feet (100 meters) over category cable with Ethernet pass through RS-232 and IR control plus Power over Ethernet. It is compatible with signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The receiver works with the PRO3-UHD Matrix Switcher Series* to provide RS-232 and 12 volt-based IR control commands. The AT-UHD-EX-100CE-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.K/UHD capabilityandbull; Compatible with Ultra High Definition sources and displaysandbull; Full support of 4K/UHD streaming services and playback devicesHDCP 2.2 compliantandbull; Adheres to latest specification for High-bandwidth Digital Content Protectionandbull; Allows protected content stream to pass between devicesRemote-powered receiverandbull; Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseTandbull; Saves time and integration costsAV Ethernet power and control over HDBaseT*andbull; Receives 4K/UHD video audio 100Base-T Ethernet power and control through a single cableandbull; Eliminates multiple cable runs between source control system router and displayandbull; *Ethernet pass-through is not available on the AT-UHD-EX-100CE-RX receiver when used with the UHD-PRO3 Series matrix switchers.Extended distance HDMI extensionandbull; Receives HDMI signals up to 328 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cableandbull; Uses easy-to-integrate category cable for low-cost reliable system installationFlexible Bidirectional IR control capabilitiesandbull; IR Input designed to work with 12V IR receivers for source controlandbull; Saves control systems costsRear panel I/O connectorsandbull; Placement of ports on rear panel simplifies wire managementandbull; Saves installation time and eliminates clutterMulti-channel audio compliantandbull; Supports PCM Dolby Digital Dolby Digital Plusandtrade; Dolby TrueHD Dolby Atmos DTS Digital Surroundandtrade; DTS-HD Master Audioandtrade; DTS:Xandtrade;andbull; Allows any multi-channel audio stream to be used within a professional audio systemField updatable firmwareandbull; Front panel USB port provides an easy means for kit upgradesandbull; Ensures long term system return on investmentFront panel Power and Link status LEDsandbull; LED indicators provide power and HDBaseT link status informationandbull; Provides easy setup and troubleshootingLow-profile 1 inch (25 mm) high quarter rack-width enclosureandbull; Easy installation into confined spaces behind displays and above projectorsandbull; Keeps devices out-of-sight when placed in public spacesIncluded accessoriesandbull; User guide IR emitter P/N AT-IR-CS-TX mounting bracketsAward-winning 10 year limited product warrantyandbull; Ensures long-term product reliability and performance in residential and commercial systemsandbull; Specify purchase and install with confidenceATL-HDVS200TXWP - 2 Input Wall Plate - USA STYLE ONLYSwitcher for HDMI and VGA Inputs with HDBaseT OutputThe AT-HDVS-200-TX-WP is a 21 wall plate switcher for HDMI and VGA inputs with HDBaseT output. It features a US two-gang Decora form factor with one HDMI and one VGA input with an always-on 3.5mm audio connector. HDMI signals up to 4K/UHD @ 60Hz (YUV 4:2:0 color sub-sampling) VGA input signals up to 19201200 embedded audio and control signals can be extended up to 328 feet (100 meters). The switcher receives power from the AT-HDVS-200-RX scaler via Power over Ethernet and together they create a standalone AV switching and control system with scaling for classrooms and huddle rooms. Display control and volume commands are transmitted via CEC IP or RS-232 to any display control system switcher or other controllable device.The AT-HDVS-200-TX-WP can be the central component of a small automated AV system. Automatic display control turns-on the display automatically whenever a source is connected. When the source is removed the display is turned off. Volume is controlled by using the front panel or other control signals. Automatic input selection on the AT-HDVS-200-TX-WP works by sensing the presence of any video signal. With automatic input selection manual control systems can be eliminated. Using the AT-PS-POE it can connect directly to Atlona HDBaseT receivers such as the AT-UHD-EX-100CE-RX or projectors with HDBaseT inputs enabling simplified control and adding legacy VGA inputs at the HDVS.The AT-HDVS-200-TX-WP combines the benefits of a switcher with built-in automatic display control auto-switching and the advantages of Ethernet enabled HDBaseT signal transmission over a single cable. The switcher enables input selection and volume control from the front panel RS-232 or TCP/IP commands. It is a premium upgrade to the AT-HDVS-150-TX-WP offering advanced functions including IP management IP and CEC display control volume control and contact closure for screen control (when used with the HDVS-200-RX) volume control and Ethernet-enabled (100 m) HDBaseT performance. The HDVS-200 Series incorporates many integrator-requested features while still maintaining overall value.Automatic Display ControlThe AT-HDVS-200-TX-WP allows display control using CEC TCP/IP or RS-232 signals. This means that many more types of displays can be controlled costs are reduced and that wiring is simplified. In a commercial setting when a switcher is integrated with a display the AT-HDVS-200-TX-WP forces the display to power on automatically when a laptop is connected. At the end of the presentation when the presenter disconnects the laptop the AT-HDVS-200-TX-WP forces the display to power off. Ease of presenter interaction with the system and the savings incurred by auto-display shutdown provide a significant return on investment.andbull; CEC andndash; The AT-HDVS-200-TX-WP features Consumer Electronics Control (CEC) providing simplified display control for a significant reduction in the cost of the display (compared to an RS-232 controlled display). CEC is a communication channel incorporated in the HDMI specification allowing connected devices to control each other.andbull; TCP/IP andndash; The TCP/IP signal can be transmitted either through an independent LAN connection or through the HDBaseT connection when connected to an AT-HDVS-200-RX receiver which allows Ethernet over HDBaseT. The LAN port on the AT-HDVS-200-TX-WP not only connects to the AT-HDVS-200-TX-WP it also extends out the HDBaseT connection through an internal hub. A connected router is required to manage IP addresses.andbull; RS-232 andndash; Many displays including projectors commercial flat panel displays and some consumer displays can be controlled using the RS-232 signal directly from the switcher. The scaler is able to send commands using RS-232 for automatic display control to compatible displays.andbull; FLEXIBLE POWER BUTTON andndash; The power button on the front panel can be set to either turn the AT-HDVS-200-TX-WP on/off or it can be set to control the attached display. In addition to using the front panel power button display on/off commands can be triggered automatically based on presence of video signals or by a third-party control system using either TCP/IP RS-232 or CEC signals.andbull; SWITCHER OR DISPLAY VOLUME CONTROL andndash; Volume control buttons on the front panel can control either the analog audio output of the AT-HDVS-200-TX-WP or they can be set to control the volume of any device that allows volume control using TCP/IP or RS-232 such as a flat panel display DSP or another switcher. This gives great flexibility to the system design.andbull; MULTIPLE POINTS OF CONTROL andndash; Since all these commands can be sent using TCP/IP it becomes simple to have multiple control points in a larger system. The AT-HDVS-200-TX-WP could be used as an input device for an AT-UHD-CLSO-824 AT-UHD-CLSO-612ED or AT-UHD-SW-5000ED and the buttons would then be able to manage a variety of functions such as andldquo;Show meandrdquo; and volume.Reliable Auto-SwitchingAutomatic input selection on the AT-HDVS-200-TX detects an active video signal rather than looking for the 5-volt hot plug signal. This means that devices such as DVRs DisplayPort adaptors and other devices that keep the 5-volt hot no longer trigger the automatic input selection. This gives far more reliable performance with these products.HDVS-200 SeriesThe HDVS-200-TX-WP is a simple audio visual system with automatic input selection for HDMI and VGA inputs and automatic projector on/off/volume control. It is a premium upgrade to the HDVS-150 Series offering functions that enable IP management and other advanced installation functions including IP display control contact closure for screen control CEC display control for consumer displays and Ethernet-enabled (100 m) HDBaseT performance. The switcher can be installed under a desk/table/lectern. The HDVS-200 series incorporates many integrator-requested features while still maintaining overall value.The AT-HDVS-200-TX-WP is ideal for:Complete System Applications: Used with the AT-HDVS-200-RX the wall plate switcher accommodates an HDMI 1080p source plus a VGA source in classrooms huddle rooms and small conference rooms. The pair offers auto-switching HDBaseT transmission scaling and control functions. Included are IP configuration/management and other advanced installation functions such as IP display control contact closure for screen control CEC display control for consumer displays and Ethernet-enabled (100 m) HDBaseT performance.Larger System Applications: The AT-HDVS-200-TX-WP works as a remote input device for switchers with HDBaseT inputs including the AT-UHD-CLSO-824 matrix switcher the AT-UHD-CLSO-612ED or the AT-UHD-SW-5000ED. The buttons can be used with the switcher for display power show me functions and volume.Configured and Managed by AMSThe AT-HDVS-200-TX-WP also supports the Atlona Management System (AMS) a powerful network software platform that integrates product configuration management and updating. Specially designed for IP-controllable Atlona Products the Atlona Management System reduces installation time and enables remote monitoring and support. To learn more please visit AT-SW-AMS.Features21 HDBaseT switcherandbull; Features one HDMI input plus a VGA input with 3.5mm audio connectorandbull; Allows advanced HDMI display devices to be used with legacy VGA sourcesAutomatic display controlandbull; Automatically changes projector power state based on active or standby mode of switcher. Control signals transmitted via CEC IP or RS-232andbull; Eliminates need for complex control system in AV systems. CEC enables control of low-cost consumer displays.Automatic input selection using video detection technologyandbull; Selects active input when sources are connected andbull; Eliminates need for a complex control system in AV systemsTCP/IP and RS-232 control of switcherandbull; Flexible control options for compatibility with third-party control systems. RS-232 controlled from HDBaseT connectionandbull; Reduces integration time and costsEthernet-enabled HDBaseT extensionandbull; Transmits IP and AV signals up to 328 ft. (100m)andbull; Uses easy-to-integrate category cable for low-cost reliable system installationFront panel input select buttonandbull; Overrides auto-switching when two active sources are presentandbull; Simple manual control allows presenter to maintain control of AV systemFront panel Display on/off controlandbull; Offers convenient user features to override auto-switching when two active sources are present plus display andbull; Simple manual controls allow presenter to maintain control of AV systemFront panel volume controlandbull; Remotely controls audio volume using TCP/IP or RS-232; provides andlsquo;Muteandrsquo; modeandbull; Eliminates need for manual operation of display or use of IR remote controlWorks with AMSandbull; This IP-controllable product can be remotely managed by the Atlona Management System softwareandbull; Integrates product configuration management and updates to reduce installation time and enable remote supportIncluded accessoriesandbull; User guide and mounting bracketsAward-winning 10 year limited product warrantyandbull; Ensures long-term product reliability and performance in residential and commercial systemsandbull; Specify purchase and install with confidence

1. Brand: AtlonaTechnologies
2. rrp: £766  
3. Pack Size: 1  
4. Parcel Dimensions: n/a  
5. AtlonaTechnologies Reference: 4K-HDVS-WP-EXT  
6. EAN/UPC Number: