TASCAM DR60MK2

Product Description

1. TASCAMand#039;s DR-60DmkII an update of the award winning DR-60D is the audio recording solution for on-set filmmakers and videographers. The streamlined design fits perfectly under a DSLR camera rig without relying on bulky recorders or the limited audio quality of the cameraandrsquo;s microphone in.The DR-60DmkII is the next generation of 4-track solid-state recording based on TASCAMandrsquo;s decades of recording innovation. The upgraded HDDA microphone preamps provide up to 64dB of gain capturing every nuance of a performance. Up to four channels at a time can be recorded to the internal SD Card at up to 96kHz/24-bit WAV file resolution. Two of the mic inputs utilize locking XLR connectors with 48V phantom power the other two use an 1/8andrdquo; stereo connector for wireless and lavaliere microphones.A Camera Output sends the mic mix to the camera for later synchronization and a Camera Input is provided for monitoring playback. An additional headphone out and line out assist the crew during filming. The DR-60DmkII is designed for low-noise operation including soft touch buttons and dedicated gain controls.Multiple recording modes are available on the DR-60DmkII. Four-Channel Mode records all four microphone inputs. Dual Recording is an alternate setting capturing a copy of your audio at a lower level for a distortion-free safety track. Menus and operation are well laid out owing to decades of innovative recording design.Reach beyond the limited performance of your cameraandrsquo;s audio to capture the other half of your film. At a cost less than competing preamps the TASCAM DR-60DmkII is the ultimate 4-track recorder designed for filmmakers television live events and web broadcast.High-Quality HDDA Mic PreampsHigh quality mic preamps are a necessity for high-grade sound. The DR-60Dand#039;s HDDA mic preamplifiers (High Definition Discrete Architecture) employ discrete circuitry and premium parts approved after months of evaluation testing. The HDDA s circuit achieves an incredibly high EIN (-120dBu) for the lowest noise level available. The DR-60DmkII mic preamps have been upgraded for up to 64dB of gain with new XLR input jacks for greater cable compatibility.A CIRRUS LOGICand#039;s AD converter (used also on the DR-40 portable recorder) is used to ensure detailed recording from any input signal. A Variety of Inputs and Outputs with Internal MixingThe DR-60DmkII can record up to 4-tracks simultaneously allowing multiple microphones to be used while filming. Inputs 1/L and 2/R can be selected for mono or stereo link operation. Three sets of stereo outputs are provided. A Camera Out sends a reference track recording to the camera. The Line Out can feed a mixer or recorder. Finally a powerful Headphone Out is available for direct monitoring. Each of these outputs has its own level control and the Camera Out can be attenuated to microphone level without the need for an attenuating cable. The DR-60DmkII has an internal digital mixer for all 4 tracks. Adjust pan and level add a Limiter or Hipass Filter (40/80/120Hz) and set individual channel Delay from the user-friendly set-up. The DR-60DmkII is ready to use right out of the box with its external non-menu-intensive controls.Multiple record modes meet any challenge on-setThe DR-60DmkII includes several recording modes to adapt to any recording scenario: MONO/DUAL MONO mode: Ideal for single source microphones like using a shotgun together with a clip-on lavaliere mic STEREO/DUAL STEREO mode: These modes are ideal for shooting with a stereo or mid-side microphone. A Mid-Side Decoder is built in and can be added either during monitoring or before recording4CH mode: This mode records all four microphone inputs to their own tracks. DUAL MONO and DUAL STEREO mode: Records a back-up safety track in case levels are set too high and clipping occurs. The safety track can be set to record from -6dB to -12dB below the initial take. If an actor suddenly screams a line you have a backup recording that isnandrsquo;t distortedCustom-designed for DLSR ShootersSoft-Touch ControlsEvery aspect of the DR-60DmkII is designed specifically for DSLR Audio for Video Recording. The keys of the unit are designed specifically for quiet operation to eliminate handling noise. The Slate feature is designed to mark tracks easily while in production. The input and output layout is designed for versatile use. Whether the device is used under a camera on a rig or strapped around a solitary sound engineer TASCAMand#039;s DR-60D will meet all on-site audio production needs.Dedicated Camera OutputThe CAMERA OUT connector sends the mix from the DR-60DmkII to your camera. An adjustable level control is provided as many DSLR cameras lack an input control. The camera audio gets a clean mix from the DR-60DmkII to assist syncing tracks in editorial. Most modern editors andndash; including Final Cut Pro X and Adobe Premiere andndash; include a function to automatically synchronize audio recordings with camera clips. If your editing software lacks this feature applications such as Red Giant PluralEyes can automate the process.Slate Tone Generator for Tighter LockThe internal slate tone generator produces various tones for easy track making and recognition. Slate tones can be generated two ways: Automatic: Tones are added to the head or the head and tail of each clip (from 0.5 andndash; 3 sec) Manual: Push the SLATE button to record a tone Ch 3 and 4 Inputs Support High-Output MicrophonesThe channel 3/4 input connector supports a high-level maximum input andndash; up to +10dBV. Many microphones designed for use with video cameras have a high-level output and a 3.5mm output connector. Plug-in power is also available for microphones that need it.Tripod Mounting on Top and BottomThe DR-60D can be placed between a DSLR Camera and a tripod or mounted to a cage or follow-focus rig. A tripod socket is on the bottom of the unit and a (removable) tripod bracket is mounted on the top.Lightweight Body Designed for Rugged PortabilityThe DR-60DmkIIand#039;s body was manufactured with very rigid plastic for a durable but lightweight design. TASCAM understands how important weight is to steady camera movement when filmmaking. In addition to its light weight the feature-rich DR-60DmkII is extremely compact. Only 5.25 wide the DR-60DmkII wonandrsquo;t interfere with camera operation. All batteries can be replaced without removing the device from the Camera or tripod / rig.

1. Brand: TASCAM
2. rrp: £185  
3. Pack Size: 1  
4. Parcel Dimensions: n/a  
5. TASCAM Reference: DR-60DMK2  
6. EAN/UPC Number: